# generated by Slic3r 0.9.11-dev on Thu Jul 18 10:16:09 2013
avoid_crossing_perimeters = 
bed_size = 230,280
bed_temperature = 0
bottom_solid_layers = 4
bridge_acceleration = 100
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 2500
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M400\nM104 S0 ; turn off nozzle heater\nM140 S0 ; turn off bed heater\nG91\nG1 Z2\nG90\nG1 X5 Y240 F9000\nM84     ; disable motors\nM107   ; disable fan
external_perimeter_speed = 60
external_perimeters_first = 0
extra_perimeters = 
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0.52
fan_always_on = 1
fan_below_layer_time = 30
filament_diameter = 3
fill_angle = 35
fill_density = .2
fill_pattern = honeycomb
first_layer_bed_temperature = 0
first_layer_extrusion_width = 0.52
first_layer_height = 100%
first_layer_speed = 40
first_layer_temperature = 0
g0 = 0
gap_fill_speed = 60
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 2500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.52
infill_first = 0
infill_only_where_needed = 0
infill_speed = 120
layer_gcode = 
layer_height = 0.15
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 30
min_skirt_length = 0
notes = 
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 
output_filename_format = [input_filename_base].g
perimeter_acceleration = 1500
perimeter_extruder = 1
perimeter_extrusion_width = 0.52
perimeter_speed = 100
perimeters = 2
post_process = /home/pauljl/bin/gcodeview
print_center = 115,140
raft_layers = 0
randomize_start = 
resolution = 0
retract_before_travel = 1
retract_layer_change = 1
retract_length = .85
retract_length_toolchange = 3
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 45
rotate = 0
scale = 1
skirt_distance = 1
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 15
small_perimeter_speed = 50
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0.52
solid_infill_speed = 90
spiral_vase = 0
start_gcode = G21\nG90\nG92 X0 Y0 Z0 E0
support_material = 1
support_material_angle = 35
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_layers = 1
support_material_interface_spacing = .5
support_material_pattern = rectilinear
support_material_spacing = 4
support_material_speed = 60
support_material_threshold = 135
temperature = 0
threads = 1
toolchange_gcode = 
top_infill_extrusion_width = 0.52
top_solid_infill_speed = 60
top_solid_layers = 4
travel_speed = 180
use_relative_e_distances = 
vibration_limit = 0
wipe = 0
z_offset = 0